The above image shows the long equipment pod and the instrument tunnel that I fashioned out of 1/8" x 1/16" styrene strip. I rounded the corners of the top and then sanded the tip of the equipment pod so that they matched. Here they are just dry fitted to show the attachment. Next I used … Continue reading 1/48 Wings Atlas D Update 12
Month: December 2025
1/48 Wings Atlas D Update 11
The above photo is one of the vernier engines. While test fitting it to the booster side I noticed that the back was not quite long enough. I cut some 0.040 stock and used Plasti-Zap to attach it. I then sanded and filled it to fit the rest of the part. I'll do the same … Continue reading 1/48 Wings Atlas D Update 11
Luhman-ations 