After filling a bit more and another coat of primer, the area for the C-band antenna was finished. See above. I also covered the hole in the back of the post to which the instrument panel is attached. I also gave it a coat of primer. Next up was painting the control panel. I was … Continue reading 1/48 Wings Atlas D Update 18
Tag: Hobby
1/48 Wings Atlas D Update 17
With the Challenger build finished I can get back to finishing up the 1/48 Mercury Atlas build. When I built the Mercury Redstone last year I started with the escape tower. This time I'm starting on the capsule instead. I began by filling the mounting hole in the side of the capsule with a section … Continue reading 1/48 Wings Atlas D Update 17
Hasegawa 1/200 Space Shuttle Update 6 (Final)
I was toying with the idea of using some very fine styrene rod to detail the SSME's that came with the kit. They are pretty plain. Also not quite the right shape, but I thought that if I detailed them it might not be quite as noticeable. Back at the end of March I was … Continue reading Hasegawa 1/200 Space Shuttle Update 6 (Final)
1/48 Wings Atlas D Update 15
It's about time I post an update on the Mercury Atlas. Progress has been slow but steady. The above photo shows the booster section of the model. I drilled two holes about 1 1/4 inch deep into the center of each nozzle. This will allow the model to be placed on the base which has … Continue reading 1/48 Wings Atlas D Update 15
Hasegawa 1/200 Space Shuttle Update 4
The above photo shows the foil I added to simulate the thermal blanks in the payload bay. The open areas in the center will not be seen when the payload is added. I needed that for a good glue joint when I attach them. The payload bay is now glued into the shuttle and the … Continue reading Hasegawa 1/200 Space Shuttle Update 4